Manufacturing Archives - Page 2 of 2

How Fit and Function Affect Spring Longevity

It is fundamental to optimal spring operation and spring longevity that it fits and works freely within the space available. While this may sound obvious, insufficient space for a spring to operate within is a common cause of spring failure. How Fit and Function of Compression Springs Affects Spring Longevity Compression springs often fit over a rod, within a bore, or sometimes both. It is imperative that the spring does not rub on either of these. This will prevent [...]

By JB Springs|2022-06-08T09:02:00+01:00October 27th, 2020|

How Material Affects Spring Longevity

This post is the first in our series of blogs about what affects spring longevity. The first question is ‘could a spring last forever?’ and the answer is yes, it could do if The operating stresses are not too high The working temperature does not cause the spring to lose too much load The environment does not cause corrosion The spring is not abused The spring is well-made and free from imperfections. If a spring meets the above requirements, [...]

By JB Springs|2021-11-03T16:29:31+00:00October 13th, 2020|

Equipment Spotlight – New Torsion Tester

We consistently demonstrate our dedication to staying at the forefront of the spring manufacturing industry through our investment in the highest quality, cutting-edge equipment. Another development made recently at JB Springs is the addition of a brand new MicroStudio PTM5 torsiometer. This machine will enable us to accurately measure the torque of the torsion springs we produce. We have also invested in three load cells for the measurement on compression and tension springs. Through investing in industry-leading kit such [...]

By JB Springs|2020-09-06T13:20:58+01:00September 6th, 2020|

Mark and Steve Celebrate 20 Years with JB Springs

Production Supervisors at JB Springs Mark Houldsworth and Steve Fox have reached the commendable milestone of having dedicated 20 years of service to the Yorkshire manufacturing firm. Joining the company in 2000, Mark and Steve have developed and advanced their skill set whilst contributing to the development and advancement of the company itself. Both now manage sections of production at the company, as well as Mark overseeing inspection. Director, Alex Driver, commented, “I have really enjoyed working with Mark [...]

By JB Springs|2020-09-08T14:12:34+01:00September 6th, 2020|

Spring Equipment Spotlight – New Load Testers

JB Springs consistently demonstrate our dedication to staying at the forefront of the spring manufacturing industry. This shows through our high-quality, cutting-edge equipment investments to assist in our production of compression, tension and torsion springs and wireform products. Most recently, we have installed brand new load testers (image above). Made by Italian machinery manufacturers and industry leaders Microstudio using advanced technology, these devices automatically and accurately measure static length and load capabilities of tension and compression springs, with a [...]

By JB Springs|2021-11-03T14:21:45+00:00September 6th, 2020|

Doing Our Bit In Fight Against Covid-19

In these testing times, the team on the shop floor at JB Springs can be proud of contributing to the fight against Coronavirus. Over the last eight weeks we have been manufacturing springs for ventilators, hospital beds, and our 3D printer has been producing components for PPE visors.These springs for ventilators were manufactured and dispatched within 24 hours of the order being received.

By JB Springs|2020-08-26T12:53:17+01:00May 15th, 2020|

3D Printed Face Shields

JB Springs is putting its 3D printing technology to good use during these difficult times by producing the face shields to help local frontline workers to stay safe.

By JB Springs|2020-05-15T16:09:10+01:00April 12th, 2020|

JB Springs Supply Chain Unaffected By Coronavirus

We have been asked by a number of our customers if our supply chain is likely to be affected by the outbreak of the coronavirus originating from China.As a UK spring manufacturer, we source the vast majority of our raw materials from the UK and Europe and do not have any originating from China. As a result, our supply chain is currently unaffected by the coronavirus. We will, of course, advise if the situation changes.Companies should act promptly to assess [...]

By JB Springs|2020-08-26T13:01:08+01:00February 21st, 2020|